Sabtu, 29 November 2014

A Professional Painter Atlanta GA Based Will Increase Your Curb Appeal

By Ida Dorsey


Painting the front or sides of your commercial building is a good way to present a clean image to potential visitors. Your house can look better when it has a clean coat of paint and it improves the curb appeal as well as the resale value. The ability to paint outside, inside or on other structures is a flexible way of present a good impression to all. Getting a professional painter Atlanta or Marietta GA has on their business roles will make all of the difference.

Paint can be applied in a variety of ways. A brush and bucket of paint is still one way to apply this fresh coating. It does take longer to complete the task than spraying and it can leave drips, if not applied properly with a fairly thin, even coat. Many people will still use this method for painting a gazebo, deck or something that is rather small in size and the painter can get all around and be able to reach the top as well.

Painters, as a general rule, will use a spray gun on external surfaces. This can be an old school air compressor type or a modern airless system. This type of spray application is best for larger areas and especially for rough surfaces. Rough surface examples are shake siding, concrete or even cement constructions, along with rough cut lumber.

Inside of currently occupied premises, either commercial or private, paint brushes or paint rollers are usually the way to go. There are many surfaces, most of which will be painted different colors form each other. There are wide expanses of walls for the roller, as well as the ceilings and there are baseboard, sills and frames, along with other wood word elements that must be dealt with by brush.

No matter whether these painters are painting outside or inside, each surface must be properly prepared before paint can go on. Outside this means a pressure washing session to remove all dirt, debris and loose paint. This is done in a specific way, usually top to bottom, allowed to dry and then the painting can commence the next day.

While painting inside, the process will include a few more preparations. Holes that have happened, which may have caused the thought of painting in the first place, will need to be repaired. Scratches can be filled in and other damage can be covered. After any upgrading, all surfaces are then cleaned, allowed to dry and the taping and painting can proceed.

A new build out of a new or renovated structure will require, and allow, the inclusion of spray painting inside. The texture of the walls and ceilings will usually come first and accomplished with a mixture of joint compound and water. This mixture is poured in the spray gun and applied to all surfaces, except wood work, and allowed to dry. It presents an attractive texture to the surfaces that makes them look and feel much better.

The preparation of all surfaces are the biggest issue when it comes to painting and, because of that, many home and business owners, wanting to do it themselves fail at it. The professionals that all business and home owners can appreciate are the ones that have a demonstrated ability to come in, do the job, cleanly, and get done quickly. Finding the one company who can do that, time and time again, is as easy as checking with everyone you know who has had some painting done.




About the Author:



Tidak ada komentar:

Posting Komentar